![]() ![]() the secondary injectors may use E85 or race gas). It also is possible to use two independent fuel systems for each set of injectors (e.g. stock 310cc injectors can be used until boost, at which point both 310cc and 1300cc injectors are used). The injector sizes and dead times for each set of injectors do not need to be the same (e.g. The primary injectors are always used, and may be stock or other injectors with a rapid opening time and good spray pattern., The secondary injectors activate based on driving conditions, and may be larger than the primary injectors. Staged injection allows the use of primary and secondary injectors of different sizes. The main concern is that the ECU injector driver outputs will be damaged as they are not designed for the amount of current that low impedance injectors draw. Why not just use the stock ECU to control low impedance injectors? Well, since low impedance injectors draw more current than high impedance injectors, they will eventually overheat if the injector driver output does not limit the current. The Hondata injector driver allows either the use of high or low impedance injectors without a resistor box either as injectors slaved to the ECU injector output or as staged injectors. This is because we are a USA Hondata dealer, and we can only sell to USA customers. If you live outside the United States, we cannot ship this product to you. If your application is not CARB Compliant / Exempt and you're shipping to California, our system will let you know on the final checkout page. CARB Compliance / Exemption Warning: If you live in California and your application for this product is not CARB Compliant / Exempt, then you cannot purchase it for public highway or street use (in that case it could only be used for formally sanctioned race use on a racing vehicle that may never be used on a public highway or street). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |